High Quality 2-post symmetrical or asymmetrical car lift from Challenger Lifts.
Challenger Lifts’ SA10 features the ability to be configured in either the symmetric or asymmetric position depending upon the service or spacial requirements of your workshop.
The SA10 features 3-stage front arms that provide maximum extension and
retraction ensuring safe and reliable lifting on all vehicles within rated capacity. With adjustable height and width options as standard, double telescoping screw pads, durable powder coat finish, plated arm restraints and pins and many other appealing features, the SA10 will accommodate the rigorous demands of a full service facility. Available in red and blue.
The post lifts come with accessories to turn your two post vehicle lift into a complete productivity center. All Challenger two post lifts are designed and manufactured to the highest standards for performance, durability and longevity.
Have a Question? Contact Us
CALL US 1300 56 44 22
Features & Benefits
Challenger Lifts USA meet strict standards to obtain Gold Label of the ANSI Accredited ALI Certification, which by Australian standards is required for Worksafe registration.
Compliance and safety is a fundamental duty at Logicar. Logicar can provide Worksafe Design Registration certificates to help you make the right decision in creating a safe workplace for your employees.
10,000 lbs. (4536kg)
A Rise Height1
B Overall Height
11' 4-1/2" / 11' 10-1/2" (3467mm / 3620mm)
C Overall Height (Cylinder Extended)
11' 10-1/2" (3620mm)
- with SA10EH2 2' height extension
13' 4-1/2" / 13' 10-1/2"(4077 / 4230mm)
D Overall Base Width
10' 9" / 11' 3" (2356mm / 2508mm)
10' 11-1/2" / 11' 5-1/2" (3340mm / 3493mm)
E Drive-Thru Clearance
92-3/4" / 98-3/4" (2356mm / 2508mm)
88-1/2" / 94-1/2" (2248mm / 2400mm)
F Floor to Overhead Swith
131-1/8" / 137-1/8" (3331mm / 2483mm)
G Short Arm Reach
22-3/8" - 41-1/2" (3331mm - 1054mm)
H Long Arm Reach2 (min/max)
38-1/4" - 59" (972mm - 1499mm)
I Screw Pad Height
4-5/8" - 6-7/8" (111mm - 165mm)
J Inside of Columns
106-3/4" / 112-3/4" (2711mm - 2864mm)
101-1/2" / 107-1/2" (2578mm - 2731mm)
2HP, Single Phase, 60Hz
208v - 230v
Speed of Rise
Max. Load per Arm
2,500 lbs. (1134kg)
Ceiling Height Required
*Lift capacity ratings are based on loads equally distributed on all four arms. 1 Rise Height is measured with telescoping screw pads in highest position. 2 Specifications are listed without rubber pad, for measurements with rubber pad add 1/4" (6mm) 3 Overall width of Asymmetric lift is 11' 3"' / 11' 9" including power unit
Proud distributors for