Challenger Lifts new DX77 7,700 lb.(3500kg) capacity scissor lift was engineered with efficiency and productivity in mind. Our scissor lift can easily lift all makes and models (within rated capacity) with synchronized hydraulic system. Diamond plated flip-up approach ramps allows the platform to extend to accommodate longer wheelbase vehicles.
DX77 double scissor lifts offer free access all around the vehicle, and between platforms, with a cross-member free design providing an uncluttered and hazardous free work area.
The new DX77 scissor lift can be installed above ground or flush mount.
Challenger Lifts USA meet strict standards to obtain Gold Label of the ANSI Accredited ALI Certification, which by Australian standards is required for Worksafe registration.
Compliance and safety is a fundamental duty at Logicar. Logicar can provide Worksafe Design Registration certificates to help you make the right decision in creating a safe workplace for your employees.
|
Model
|
DX77
|
DX77R
|
|
Lift Capacity
|
7,700 lbs.(3500kg)
|
7,700 lbs.(3500kg)
|
|
Installation
|
Standard
|
Flush Moutn
|
|
A Rise Height
|
74-1/2" (1890mm)
|
70" (1775mm)
|
|
B Overall Length (Lowered)
|
82-3/4" (2102mm)
|
82-3/4" (2102mm)
|
|
C Overall Length (Raised)
|
83-1/4 (2114mm)
|
83-1/4 (2114mm)
|
|
D Overall Width
|
79-3/4" (2026mm)
|
68-1/4" (1733mm)
|
|
E Platform Length
|
59" (1500mm)
|
59" (1500mm)
|
|
F Platform Width
|
23-1/2" (600mm)
|
23-1/2" (600mm)
|
|
G Width Between Platforms1
|
21" (533mm)
|
21" (533mm)
|
|
H Ramp Length
|
11-3/4" (300mm)
|
11-3/4" (300mm)
|
|
I Lowered Height
|
4-1/2" (116mm)
|
-
|
|
Motor
|
3HP, Single Phase, 60Hz
|
3HP, Single Phase, 60Hz
|
|
Voltage
|
208/220v
|
208/220v
|
|
Air Supply Required
|
90-120 psi
|
90-120 psi
|
|
Speed of Rise
|
43 Seconds
|
43 Seconds
|
|
Max Load per Platform
|
3,850 lbs. (1750kg)
|
3,850 lbs. (1750kg)
|