Overview
TradeQuip professional quality, low profile Garage Jack with twin piston 'quick lift' facility that provides extra lift per pump of the handle. 65mm entry height makes this jack particularly suitable for reduced clearance vehicles. Fast lowering two-piece twist handle is fitted with a foam bumper preventing possible panel damage when being pumped. Extra large cushioned saddle for easier location under vehicles. This long reach low profile jack is becoming known as Australia's most versatile jack. It's low enough to get under the lowest of performance vehicles and strong enough to lift 4WD's...
Have a Question? Contact Us
Features
- 65mm low height and 280mm deep reach is ideal for the low ground clearance vehicles
- Tradequip's dual pump lift technology offers a quicker lift for professional performance
- Internal bypass valve protects the hydraulic system from over pumping
- U-joint release mechanism provides precise load descent control in any handle position
- Heavy gauge steel construction features rolled edges for added strength
- Protective foam handle cover prevents vehicle damage
WARNING: Always ensure the vehicle wheels are chocked before lifting.This Garage Jack is a lifting and lowering device only and is designed for lifting part of the total vehicle. Do not move or dolly the vehicle whilst the vehicle is on this Garage Jack.
This Garage Jack must only be used on hard level surfaces and be free to roll during lifting and lowering. DO NOT get under a vehicle that is only supported by this Garage Jack. ALWAYS USE JACK STANDS.
- Safe Working Capacity: 3,000kg
- Minimum Lift Height: 65mm
- Maximum Lift Height: 510mm
- Handle Length: 1100mm
- Front Castors: 60mm dia 45mm width
- Rear Castors: 60mm dia 25mm width
- Saddle Diameter: 120mm with saddle pad
- Chassis Dimensions: 760(L) x 365(W) x 160(H)
- Nett Weight: 52kg
- Carton: 840(L) x 400(W) x 190(H)mm
- Gross Weight: 54kg